1986 Honda CR 125
Info: Rear engine mount connects to  swingarm
[535] 1704x2272 / djstones
Auckland New Zealand
 
Info: The front engine cradle was rebuilt
The exhaust was made by Custom chambers
[555] 1704x2272 / djstones
Auckland New Zealand
 
Info: carb has filter pod mounted inside the air the box connected by a radiator hose .
A round steel ring was welded into the frame to give the carb clearance.
The foot peg was modified to fold back and ...
[635] 2272x1704 / djstones
Auckland New Zealand
 
Info: This bike feels like Honda made it .
[556] 2272x1704 / djstones
Auckland New Zealand
 
Info: I have changed to my B motor ( Standard 1986 XR 200 ) while A motor( 1983 Ported and high comp) has an upgrade . I have also added Lights from a XR 200  .
[1029] 2272x1704 / djstones
Auckland New Zealand
 
Info: 1st stage
[900] 2272x1704 / djstones
Auckland New Zealand
 

[639] 2272x1704 / djstones
Auckland New Zealand
 
Info: Rear view of CRX200
[634] 2272x1704 / djstones
Auckland New Zealand
 
Info: Mods include New cradle,new brake pedal,frame mod to carb inlet path,Foot peg folds back further and kick lever is shaped to miss foot peg and a bracket was made to connect the swing arm pivot to the ...
[770] 2272x1704 / djstones
Auckland New Zealand
 
Info: This Bike is Built with a 1983 XR 200 engine tuned to run on racing fuel
[630] 2272x1704 / djstones
Auckland New Zealand
 
Info: Caleb's 1986 honda cr125r !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[561] 2576x1716 / 6bandit6
Stanley United States
 
Info: Caleb's 1986 Honda cr125r!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[372] 2576x1716 / 6bandit6
Stanley United States
 
Info: Caleb's 1986 hinda cr125r!!!!!!!!!!!!!!!1
[608] 2576x1716 / 6bandit6
Stanley United States
 
Info: YAMAHA TZR 250 1986
[404] 1600x1200 / rodskieblackriders
makati Philippines
 
Info: rodskie touring bike yamaha srx 250 1991
[394] 640x480 / rodskieblackriders
makati Philippines
 
Info: just arrived from mountain trail 
rodskie manila philippines
[524] 1600x1200 / rodskieblackriders
makati Philippines
 

[857] 700x525 / db75xl100
Fort St. John Canada
 
Info: I just repainted the PSI pipe and silencer
[697] 600x450 / db75xl100
Fort St. John Canada
 
Info: Black rims and no inverted forks yet.
[2983] 768x536 / ssmechanix
Bridgewater United States
 
Info: Here it is from the other side.
[674] 750x562 / db75xl100
Fort St. John Canada
 
Info: Here is my CR with the side # plates and a silencer installed.
[665] 750x562 / db75xl100
Fort St. John Canada
 

[1691] 829x622 / doc4pcs
United States
 
Info: My seat and rad shrouds arrived off of ebay, now I just need my silencer and rear number plates to show up!  I had a leak in one rad but fixed that with JB Weld.  Can't wait for some dirt to appear!
[884] 700x496 / db75xl100
Fort St. John Canada
 
Info: The previous owner used water instead of antifreeze in this bike.  It ate right through the clutch cover so the water and oil mixed.  I scraped off all the deposits and then JB welded the water pump h...
[1178] 600x430 / db75xl100
Fort St. John Canada
 
< BACK
294 Photos were returned
Page: [1] [2] [3] [4] <5> [6] [7] [8] [9] [10] [11] [12] [13]
NEXT >


Links:
Full listing of members with this bike [76]
Listing of members who have photos [62]

Return to the BikePics 1986 Honda CR 125 Page
Return to the BikePics Honda CR 125 Page
Return to the BikePics Honda Page
1997-2014 Bikepics PTY LTD