dezrae's 2000 Honda VFR 800
Info: Left side of the bike, just out of town on a quiet piece of road.
Views / Day: 0.5
800x600 / 48 KB

 
Info: A close up of the Triple Clamp, here u will see the custom Flamte etching around the triple clamp , plus the carbon Triple clamp cover.
All polishing and flaming done by
Matthew Lundy at
Matts Meta...
Views / Day: 0.4
800x600 / 59 KB

 
Info: A view of the cock pit!! hehehehe. :-)
Views / Day: 0.4
800x600 / 62 KB

 
Info: A view of the polished brake lever and the Two Brothers Brake Master cyclinder cover
All polishing and flaming done by
Matthew Lundy at
Matts Metal Polishing - The Polishing Professional
http://go...
Views / Day: 0.4
800x600 / 94 KB

 
Info: Looking at the Polished fornt wheel and forks. U will notice the flames on the forks, these are bead blasted.
All polishing and flaming done by
Matthew Lundy at
Matts Metal Polishing - The Polishin...
Views / Day: 0.3
800x600 / 59 KB

 
Info: Front forks again, but this time a different angle
All polishing and flaming done by
Matthew Lundy at
Matts Metal Polishing - The Polishing Professional
http://go.to/mmptpp
Views / Day: 0.3
800x600 / 77 KB

 
Info: Another view of the left side, this time with me laying on the scorthcing hot bitumen. The things bike riders will do to get a different shot of their bike!!
All polishing and flaming done by
Matthe...
Views / Day: 0.4
800x600 / 44 KB

 
Info: Here u will see my custom licence plate holder and rego holder. U will notice some custom etching in the licence plate holder as well, and again all supplied by Matt Lundy.

All polishing and flamin...
Views / Day: 0.2
800x600 / 70 KB

 
Info: The right side of my ride and me laying on the bitumen again to get a different photo. 
All polishing and flaming done by
Matthew Lundy at
Matts Metal Polishing - The Polishing Professional
http:/...
Views / Day: 0.6
800x600 / 38 KB

 
Info: Right side of my bike again, this time with me standing. The damn bitumen is getting 2 hot!
All polishing and flaming done by
Matthew Lundy at
Matts Metal Polishing - The Polishing Professional
ht...
Views / Day: 0.7
800x600 / 54 KB

 
Info: Close up of the Swingarm and cush drive. Sorry its not too clear, but u can See the flames on the swingarm and the cush drive.

All polishing and flaming done by
Matthew Lundy at
Matts Metal Polis...
Views / Day: 0.4
800x600 / 53 KB

 
Info: A better photo of my swingarm and cush drive. Hehehehe, that footpeg is pretty bright aint it! Here u will c the flaming on the swingarm and cush drive far easier

All polishing and flaming done by
...
Views / Day: 0.4
800x600 / 67 KB

 
Info: The Smaller inset photo was the bike just days after it was finished being polished/custom etched. The decals from tapeworks.com really finished the bike off nicely
Views / Day: 0.4
612x411 / 70 KB

 
     
       
       
Photos: 13
Purchased: n/a
Sold: n/a
Information: Polished/Flamed Triple Clamp, Polished/Flamed Cush Drive, Polished/Flamed Swingarm, Polished/Flamed Forks, Polished/Flamed Rear Wheel, Polished Fairing Bolts, Polished Front Axel and Bolt, Polished Fork Tube Pinch Bolts, Polished Cush Drive Nut, Polished Fork Caps, Polished Brake Levers, Polished Gear Lever, Polished Clutch Lever, Polished Front Wheel, 15 carat gold plate nuts on rear wheel, Electronic Cruise Control, Power Commander II, Corbin Gunfighter Saddle, Scottolier, Custom Licence plate holder, Custom Rego holder, SheepSkin Seat cover, Power Bronze Front screen, Ventura Rack, K&N Air Cleaner, Two Brothers brake/clutch master cyclinder covers, Omrae Carbon High Exhaust, Carbon Triple clamp cover, Carbon Tank Pad, Carbon Petrol Cap cover, Ventura Headlight cover, Foam Grips, Under Seat power socket,

Related Links:
Return to dezrae's BikePics Member Page
Return to the BikePics 2000 Honda VFR 800 Page
Return to the BikePics Honda VFR 800 Page
Return to the BikePics Honda Page



1997-2014 Bikepics PTY LTD