koocanusa's 2000 Kawasaki KX 250
Info: 2010 winter rebuild project. 2000 KX250L
Views / Day: 0.3
2576x1920 / 1,710 KB

 
Info: 2010 winter rebuild project.
Views / Day: 0.3
2576x1920 / 1,681 KB

 

Views / Day: 0.3
2576x1920 / 1,733 KB

 
Info: Most of the components are in really good shape. Carb is a bit dirty and reeds were a little flimsy.
Views / Day: 0.2
2576x1920 / 1,859 KB

 

Views / Day: 0.3
2576x1920 / 2,041 KB

 

Views / Day: 0.3
2576x1920 / 1,807 KB

 

Views / Day: 0.3
2576x1920 / 1,960 KB

 

Views / Day: 0.2
2576x1920 / 1,883 KB

 
Info: Oval rings don't make good compression
Views / Day: 0.2
2576x1920 / 1,747 KB

 

Views / Day: 0.3
2576x1920 / 1,592 KB

 

Views / Day: 0.2
2576x1920 / 1,819 KB

 

Views / Day: 0.2
2576x1920 / 1,635 KB

 

Views / Day: 0.2
2576x1920 / 1,838 KB

 
Info: Almost ready for sandblast, rust seal, prime and paint :))
Views / Day: 0.2
2576x1920 / 1,951 KB

 

Views / Day: 0.2
2576x1920 / 2,123 KB

 
Info: After hours of sanding and polishing
Views / Day: 0.2
2576x1920 / 1,781 KB

 
Info: This is the completed frame. I had it and some other parts POWDER COATED. It was baked, media blasted then coated. Threads were re-tapped but I'd suggest plugging them before anything.
Views / Day: 0.2
1600x1200 / 435 KB

 

Views / Day: 0.2
1600x1200 / 341 KB

 
Info: I also POWDER COATED the shock spring too. I had concerns about paint. Even thou the spring under goes deflection there is still a lot of compression. I thought paint would crack and flake. Besides th...
Views / Day: 0.2
1600x1200 / 314 KB

 
Info: MY REBUILT CARB.
Views / Day: 0.2
640x480 / 51 KB

 
Info: gonna file the clutch fingers
Views / Day: 0.2
1600x1200 / 361 KB

 
Info: New super light single ring piston. Wicked awesome!!
Views / Day: 0.2
1600x1200 / 432 KB

 
Info: another shot of the new super light piston and cylinder with head
Views / Day: 0.3
1600x1200 / 473 KB

 
Info: Photo Information: TECH TIP... Press bearing in and out with a giant c-clamp. Use appropriate size socket for installation that will fit thru the bearing bore. Use a large socket underneath for remova...
Views / Day: 0.2
1600x1200 / 404 KB

 
< BACK
Page: <1> [2]
Sort By: Date / Img Width / File Size
NEXT >
Photos: 46
Purchased: n/a
Sold: n/a

Related Links:
Return to koocanusa's BikePics Member Page
Return to the BikePics 2000 Kawasaki KX 250 Page
Return to the BikePics Kawasaki KX 250 Page
Return to the BikePics Kawasaki Page



1997-2014 Bikepics PTY LTD