krisuk's 1996 Yamaha TRX 850

Views / Day: 0.3
2272x1704 / 1,116 KB

 
Views / Day: 0.2
2272x1704 / 1,054 KB

 
Views / Day: 0.2
2272x1704 / 915 KB

 
Views / Day: 0.1
2272x1704 / 1,100 KB

 
Info: Signals changed. Self made signal holder in front.
Views / Day: 0.2
2272x1704 / 998 KB

 		 Info: New mini signal and its self made steel-net holder.
Views / Day: 0.2
1704x2272 / 653 KB

 
Views / Day: 0.1
1704x2272 / 823 KB

 
Views / Day: 0.1
2272x1704 / 518 KB

 

Views / Day: 0.2
2272x1704 / 795 KB

 		 Info: Fighter Project just started...
Views / Day: 0.6
2272x1704 / 1,016 KB

 		 Info: After rear modification 26102008. On the way to becoming TRX Streetfighter
Views / Day: 0.3
2272x1704 / 1,157 KB

 		 Info: Reas modification. 25102008
Views / Day: 1.0
2272x1704 / 1,145 KB

 
Info: Original tail frame (not for long...)
Views / Day: 0.2
1704x2272 / 1,053 KB

 		 Info: Lower support frame cut, no turning back anymore...
Views / Day: 0.2
2272x1704 / 991 KB

 		 Info: Now a slight cut made also to the "corners" so the end could be turned into more up and in. Almost like a triangle pointing up. Note that the small plate from the end needs to be removed too...
Views / Day: 0.4
2272x1704 / 1,017 KB

 		 Info: Nicely in line with the tank....
Views / Day: 0.3
1704x2272 / 1,130 KB

 
Info: See the new angle of the rear frame pipes.
Views / Day: 0.3
1704x2272 / 974 KB

 		 Info: And next cutting more fiberglass... a hole so that I could fit the original seat in place with the original locking system.
Views / Day: 0.5
2272x1704 / 975 KB

 		 Info: Once I could see again after the dust flying around... I noticed that I had to risen the locking mechanism, I found 2 spacers and longer screws. Problem solved, and the original seat works as it shoul...
Views / Day: 0.2
1704x2272 / 926 KB

 		 Info: Here you can see the hole I needed to cut to the duck tail to be able to fit the original seat back.
Views / Day: 0.3
1704x2272 / 884 KB

 
Info: Final result of a days work. Still a lot of work left, but next summer you will see the reborn TRX Figher aka "Evil Pussymagnet" :)
Views / Day: 0.4
2272x1704 / 772 KB

 		 Info: Red arrows point the location of cuts. Dootel line marks where to cut. Do not cut off the thicker pipe on the bend! Just a bit so thet you can bend the pipes as the white arrows show.
Views / Day: 0.4
720x540 / 45 KB

 
Info: Front mask. (ex KTM EXC 400 -04) modification to fit the TRX original headlight. (Experimental at this point)
Views / Day: 0.2
2272x1704 / 838 KB

 		 Info: Second stage. Mask starting to form... Taped up.
Views / Day: 0.2
2272x1704 / 778 KB

 
< BACK
Page: <1> [2] [3]
Sort By: Date / Img Width / File Size
NEXT >
Photos: 51
Purchased: n/a
Sold: n/a

Related Links:
Return to krisuk's BikePics Member Page
Return to the BikePics 1996 Yamaha TRX 850 Page
Return to the BikePics Yamaha TRX 850 Page
Return to the BikePics Yamaha Page


©1997-2009 Bikepics PTY LTD (Australia)