lancer27's 1996 Suzuki Savage
Info: Ported intake
Views / Day: 0.2
1600x1200 / 208 KB

 		 Info: worn rocker pads
Views / Day: 0.2
1600x1200 / 156 KB

 		 Info: reworked cylinder, 0.025" milled from top to increase compression
Views / Day: 0.2
1600x1200 / 168 KB

 		 Info: cylinder bottom
Views / Day: 0.2
1600x1200 / 182 KB

 
Info: head ... 3 angle valve job ... 0.015" milled from surface for increased compression ... intake and exhaust ported significantly
Views / Day: 0.2
1600x1200 / 151 KB

 		 Info: ain't it perty?
Views / Day: 0.2
1600x1200 / 202 KB

 		 Info: head cover still needs a little clean up work and repaint
Views / Day: 0.2
1600x1200 / 211 KB

 		 Info: bottom of cover
Views / Day: 0.2
1600x1200 / 201 KB

 
Info: SAVAGE POWER
Views / Day: 0.3
256x320 / 75 KB

 
Views / Day: 0.3
1600x1200 / 489 KB

 
Views / Day: 0.5
1600x1200 / 411 KB

 		 Info: Neglected jet needle; lots of crud; common when a bike sits for long periods and collects deposits from old fuel
Views / Day: 0.2
1600x1200 / 607 KB

 
Info: Floats and needle from needle valve are coated with crud
Views / Day: 0.1
1600x1200 / 614 KB

 		 Info: Needle Jet with built up crud from same carb
Views / Day: 0.2
1600x1200 / 611 KB

 		 Info: This is the bottom view of the carb, with main/pilot jets removed to show the bottom end of the needle jet and the deposits on it; it is a bit hard to see down inside but there is a lot of crud in the...
Views / Day: 0.2
1600x1200 / 605 KB

 		 Info: Main jet...deposits (crud) had virtually welded the jet completely closed. I had to use a tiny metal wire with teeth on it to DRILL the jet passage open and it took about 20 minutes to do it. I have...
Views / Day: 0.2
1600x1200 / 619 KB

 
       
   
   
Photos: 16
Purchased: n/a
Sold: n/a

Related Links:
Return to lancer27's BikePics Member Page
Return to the BikePics 1996 Suzuki Savage Page
Return to the BikePics Suzuki Savage Page
Return to the BikePics Suzuki Page


©1997-2009 Bikepics PTY LTD (Australia)