redordead's 1989 Honda CR 250
Info: Circlip out and the internal spring removed now for a good scrub and fresh coat of paint:-)
Views / Day: 0.4
640x480 / 56 KB

 		 Info: 1989 cr250 front master cylinder stripped out for all NOS rebuild and paint!
Views / Day: 0.5
640x480 / 62 KB

 		 Info: Time to strip out the rear master cylinder for its rebuild too!
Views / Day: 0.3
640x480 / 53 KB

 		 Info: Next step clevis and retaining nuts off and grab the rubber and pull it out!
Views / Day: 0.3
640x480 / 64 KB

 
Info: Yek!
Views / Day: 0.4
640x480 / 66 KB

 		 Info: Pretty shitty pawl and washer need replaced!
Views / Day: 0.5
640x480 / 60 KB

 		 Info: Mingin as some hairy muppet might say!
Views / Day: 0.5
640x480 / 64 KB

 		 Info: All old internals were dirty but worked well and were only being replaced as a matter of course so th old internals will be bagged and passed on when the bike is sold!
Views / Day: 0.5
640x480 / 58 KB

 
Info: Quite dirty but will clean out well!
Views / Day: 0.3
640x480 / 47 KB

 		 Info: NOS 89 CR250 SWINGARM BUSHES JUST HERE THIS MORNING FOR THE BUILD AND ALMOST DONE ON THE SEARCHING FOR BITS SO I WILL BE BUILDING IT IN THE NEXT FEW WEEKS!
Views / Day: 0.6
640x480 / 57 KB

 		 Info: THE SHIPPING LABEL FROM MY REPLACEMENT OEM EXHAUST OUCH!!! OUCH!!! OUCH!!!!!!! $73.20 SHIPPING FROM WAPWALLOPEN LOL PA USA
Views / Day: 0.5
640x480 / 45 KB

 		 Info: My new pipe for the 1989 CR250RK rebuild! I'm glad i hung it out for the right pipe as i really didn't want to put on the pro circuit i bought for this bike 7 months ago! Just arrived this morning ha...
Views / Day: 0.7
480x640 / 46 KB

 
Info: Just one more package from the postie this morning! Some little mint condition brake hardware bits from the U.S. to replace U.K. weathered rusted bits! Total spend over the last 14 months now edging...
Views / Day: 0.4
640x480 / 58 KB

 		 Info: TIME TO PAINT THE SUBFRAME I THINK! ITS WEEL OVERDUE :-( These cans are filled with Honda R134 fighting red and were mixed for me by Lothian brakeways in Edinburgh! Huge thanks to Alex again! My fra...
Views / Day: 0.6
480x640 / 63 KB

 		 Info: Giving my replacement mint 89 cr250 subframe some heat before hitting it with primer!
Views / Day: 0.4
640x480 / 43 KB

 		 Info: If you're confident painting your own parts you will realise the value in paying for very good materials and paint like this UPOL ACID 8 primer which does a fantastic job of sealing the now bare met...
Views / Day: 0.4
640x480 / 47 KB

 
Info: 1989 CR250RK subframe. Just had its base coat of UPOL ACID8 so 800 ml of r134 fighting red next then a good few coats of UPOL clear coat and job done! I can't stress enough the importance of cleaning...
Views / Day: 0.4
640x480 / 45 KB

 		 Info: First couple of coats done and still looking a little pale with the light grey primer kinda shining through so another couple of coats and hey presto!
Views / Day: 0.4
640x480 / 32 KB

 		 Info: Wow the first time in 15 months that my 89 cr250 frame has had its subframe mounted on it! Slowly but surely ticking offf the last of the boxes to get the bike built so keep tuned over the next coupl...
Views / Day: 0.6
640x480 / 58 KB

 		 Info: Old rotor off and time for painting the rear hub in prep for the new Excel rim, New EBC MD6002D rear rotor and spoke replacement!
Views / Day: 0.5
640x480 / 60 KB

 
Info: Take 1
Views / Day: 0.3
480x640 / 63 KB

 		 Info: Take 2 cr250 rear hub.
Views / Day: 0.4
480x640 / 58 KB

 		 Info: take 3
Views / Day: 0.4
480x640 / 74 KB

 		 Info: My new long awaited EBC MD6002D rear disk just arrived yesterday so nearly ready with a complete new rear wheel assembly:-)))))
Views / Day: 0.5
640x480 / 82 KB

 
< BACK
Page: [1] [2] [3] [4] [5] [6] [7] <8> [9] [10] [11]
Sort By: Date / Img Width / File Size
NEXT >
Photos: 257
Purchased: n/a
Sold: n/a

Related Links:
Return to redordead's BikePics Member Page
Return to the BikePics 1989 Honda CR 250 Page
Return to the BikePics Honda CR 250 Page
Return to the BikePics Honda Page



©1997-2013 Bikepics PTY LTD