redordead's 1989 Honda CR 250
Info: Luca's little 85 QR50 and my 89 CR250, THIS IS WHERE IT ALL STARTED;-)))))) The cr250 had had a recent strip and paint / rebuild and it looked pretty good but being a big bit picky i decided to do it...
Views / Day: 0.4
640x480 / 134 KB

 		 Info: My new ride!
Views / Day: 0.2
640x480 / 107 KB

 		 Info: Currently being rebuilt
Views / Day: 0.3
640x480 / 136 KB

 		 Info: I have a few spares too:-)))
Views / Day: 0.3
640x480 / 92 KB

 
Info: Looked good but it will look a lot better in a couple of weeks!
Views / Day: 0.3
640x480 / 122 KB

 		 Info: Quite a lot of sweat and a sore elbow too:-)))) THIS REAR SHOCK HAS BEEN REPLACED WITH A VERY NICE LOW HOUR UNIT SOURCED FROM Mark Grant Designs California ( NORCALMOTOSPEEDEQUIP ) A HUUUUGE thanks...
Views / Day: 0.3
640x480 / 65 KB

 		 Info: STRIP DOWN AND THE START OF A VERY LONG AND COSTLY PROCESS!
Views / Day: 0.4
640x480 / 62 KB

 		 Info: Looked quite good but will look even better soon!
Views / Day: 0.3
480x640 / 69 KB

 
Info: LOTS OF SWEAT AND T-CUT METAL POLISH! HEY PRESTO NICE N SHINEY. UPDATE BELOW! Now been replaced by a NOS part i got from my good man in New Mexico Alan at the Deming Cycle Center! An infinite help w...
Views / Day: 0.3
640x480 / 57 KB

 		 Info: Her indoors outdoors! Funnily one of the only things not being replaced that was on the bike in this pic HAHAHAHAHAHAHA
Views / Day: 0.8
480x640 / 123 KB

 		 Info: 1989 Honda CR250R now in a hundred pieces for full rebuild:-))))) Coming soon to an EB*Y UK page near you.
Views / Day: 0.4
640x480 / 111 KB

 		 Info: 1989 CR250 POLISHED SWINGARM! NEW DECALS HERE NEW CAPS ETC ON THEIR WAY:-))) This swingarm has now been replaced with another 89 cr250 swingarm Both swingarms are date stamped only a month apart ...
Views / Day: 0.3
640x480 / 54 KB

 
Info: MY 89 CR250RK AT THE END OF JULY 2011 WITH MOST OF THE SPARES I HAVE LEFT FROM LAST YEARS 89 CR250 BREAKER. NOW STRIPPED AND READY FOR FULL REBUILD WITH MOSTLY NOS BITS! NEW OEM SEAT COVER JUST ARRI...
Views / Day: 0.4
640x480 / 92 KB

 		 Info: NEARLY BARE CR250
Views / Day: 0.3
640x480 / 75 KB

 		 Info: ROUGHLY 25 - 30 HOURS IN AFTER I STARTED! VARIOUS GRADE LIGHT SPONGE SANDING PADS AND T CUT METAL POLISH! MUCH FOREARM CRAMP LATER ( NOT FROM PAGE 3 ) ONE SHINEY SWINGARM!
Views / Day: 0.2
640x480 / 59 KB

 		 Info: 1989 HONDA CR250RK REPLACEMENT ALUMINIUM INNER CLUTCH CASING SOURCED FROM THE USA AT V MUCH EXPENSE TO REPLACE CRAP ORIGINAL ROTTEN MAGNESIUM PIECE OF SH*T:-)))))))))) NEW WISECO GASKET KIT AND IMPEL...
Views / Day: 0.4
640x480 / 72 KB

 
Info: OH YES WE DO LOVE THE NEW BITS:-))) 1989 CR250RK ENGINE AND REPLACEMENT CLUTCH/WATERPUMP CASING.
Views / Day: 0.5
480x640 / 71 KB

 		 Info: :-)
Views / Day: 0.3
640x480 / 68 KB

 		 Info: NEW RAD SCOOP DECALS AND SPARE SET AT THE BACK FOR MY NEW RAD SCOOPS AND TWO NEW PRO-LINK SWINGARM DECALS STRAIGHT FROM DEVINE'S IN GLASGOW AMONG SOME OTHER NEW OEM BITS! GETTING NEAR TIME FOR PAINT ...
Views / Day: 0.3
480x640 / 48 KB

 		 Info: Bosching the shitty white paint off my replacement subframe!
Views / Day: 0.3
640x480 / 69 KB

 
Info: BEING A BIT PICKY HERE REPLACING THE SUBFRAME BUT THE OLD ONE HAD A CRAPPY WELD ON IT, THIS ONE LOOKED WORSE BUT A COUPLE OF HOURS WORK AND IT WAS NICE AND SHINEY AND JUST ABOUT READY FOR PAINT! Up...
Views / Day: 0.2
640x480 / 104 KB

 		 Info: HEY PRESTO! WELL NEARLY LOL
Views / Day: 0.2
480x640 / 59 KB

 		 Info: GOOD OLD NITROMORSE! MELTS THE HELL OUT THE BRUSH BUT EATS PAINT IN 15 MINUTES!
Views / Day: 0.2
640x480 / 93 KB

 		 Info: VERY HANDY HAVING A SPARE 89 FRAME TO SAVE MIXING MY BOLTS UP WHILE THE FRAME 'S BEING STRIPPED!
Views / Day: 0.2
640x480 / 72 KB

 
< BACK
Page: <1> [2] [3] [4] [5] [6] [7] [8] [9] [10] [11]
Sort By: Date / Img Width / File Size
NEXT >
Photos: 261
Purchased: n/a
Sold: n/a

Related Links:
Return to redordead's BikePics Member Page
Return to the BikePics 1989 Honda CR 250 Page
Return to the BikePics Honda CR 250 Page
Return to the BikePics Honda Page



©1997-2013 Bikepics PTY LTD