tolinek's 2002 Suzuki Bandit 1200
Info: Cover the brake disc with something to avoid keriosine splashing during brake clamp washing.
Views / Day: 0.2
800x600 / 67 KB

 		 Info: Cleaned brake clamp.
Views / Day: 0.1
800x600 / 40 KB

 		 Info: Cleaned brake pistons.
Views / Day: 0.2
800x600 / 37 KB

 		 Info: Brake clamp lubricated with cupric grease.
Views / Day: 0.1
800x600 / 41 KB

 
Info: Brake clamp lubricated with cupric grease.
Views / Day: 0.1
800x600 / 37 KB

 		 Info: Assembled clamp.
Views / Day: 0.1
800x600 / 44 KB

 		 Info: Clamp ready to use. Remember to mount the clamp with glue placed on the mounting screws!
Views / Day: 0.1
800x600 / 42 KB

 		 Info: Cleaned and lubricated brake clamp. Bottom view.
Views / Day: 0.1
800x600 / 32 KB

 
Info: Dismount the rear brake clamp mounting screws.
Views / Day: 0.1
800x600 / 84 KB

 		 Info: Dirty brake clamp ;-)
Views / Day: 0.1
800x600 / 45 KB

 		 Info: Disassebling order.
Views / Day: 0.2
800x600 / 60 KB

 		 Info: Watch out for the springs that keeps the brake pads in the clamp. It can spring out of the clamp when you loosen the bolt.
Views / Day: 0.1
800x600 / 41 KB

 
Info: Dirty brake assemblies.
Views / Day: 0.1
800x600 / 66 KB

 		 Info: ...and cleaned brake assemblies.
Views / Day: 0.1
800x600 / 59 KB

 		 Info: Dirty slideway of brake pad and pistons.
Views / Day: 0.1
800x600 / 41 KB

 		 Info: Put f.e. wooden block between the pistons and pump the brake until pistons will squeez the block (remove the block then).
Views / Day: 0.1
800x600 / 51 KB

 
Info: Wash the brake calamp using brush and kerosine. It will take a while, be patient and clean it well. Effort pays back later :)
Views / Day: 0.1
800x600 / 51 KB

 		 Info: Brake pad's slideway and piston lubricated with cupric grease.
Views / Day: 0.1
800x600 / 47 KB

 		 Info: Brake pad's slideway and piston lubricated with cupric grease #2.
Views / Day: 0.1
800x600 / 55 KB

 		 Info: Brake pad's slideway and piston lubricated with cupric grease #3.
Views / Day: 0.1
800x600 / 37 KB

 
Info: Thermo shims and brake pads lubricated with cupric grease.
Views / Day: 0.1
800x600 / 61 KB

 		 Info: Pads placed in clamp. Be careful when putting the pads into the clamp. If You are not sure you have not soiled the frictional part of pad wih drease than clean it with f.e. gasoline (never with kersoi...
Views / Day: 0.2
800x600 / 51 KB

 		 Info: The special tool for pullig back the pistons laying on the lawn ;)
Views / Day: 0.1
800x600 / 78 KB

 		 Info: Red arrow points the drop of screw glue (anaerofobic). Put it on all 3 screws that hold the clamp.
Views / Day: 0.2
800x600 / 38 KB

 
< BACK
Page: <1> [2] [3]
Sort By: Date / Img Width / File Size
NEXT >
Photos: 58
Purchased: n/a
Sold: n/a

Related Links:
Return to tolinek's BikePics Member Page
Return to the BikePics 2002 Suzuki Bandit 1200 Page
Return to the BikePics Suzuki Bandit 1200 Page
Return to the BikePics Suzuki Page



©1997-2013 Bikepics PTY LTD