2002 Suzuki Bandit 1200
Info: Work is done. Do not ride the motorcycle for hour or two. In his time the glue will be dry (preliminarly).
[181] 800x600 / tolinek
Jeszkowice Poland
 
Info: Red arrow points the drop of screw glue (anaerofobic). Put it
on all 3 screws that hold the clamp.
[256] 800x600 / tolinek
Jeszkowice Poland
 
Info: The special tool for pullig back the pistons laying on the lawn ;)
[223] 800x600 / tolinek
Jeszkowice Poland
 
Info: Pads placed in clamp. Be careful when putting the pads into the clamp. If You are not sure you have not soiled the frictional part of pad wih drease than clean it with f.e. gasoline (never with kersoi...
[263] 800x600 / tolinek
Jeszkowice Poland
 
Info: Thermo shims and brake pads lubricated with cupric grease.
[228] 800x600 / tolinek
Jeszkowice Poland
 
Info: Brake pad's slideway and piston lubricated with cupric grease #3.
[253] 800x600 / tolinek
Jeszkowice Poland
 
Info: Brake pad's slideway and piston lubricated with cupric grease #2.
[257] 800x600 / tolinek
Jeszkowice Poland
 
Info: Brake pad's slideway and piston lubricated with cupric grease.
[217] 800x600 / tolinek
Jeszkowice Poland
 
Info: Wash the brake calamp using brush and kerosine. It will take a while, be patient and clean it well. Effort pays back later :)
[244] 800x600 / tolinek
Jeszkowice Poland
 
Info: Put f.e. wooden block between the pistons and pump the brake until pistons will squeez the block (remove the block then).
[214] 800x600 / tolinek
Jeszkowice Poland
 
Info: Dirty slideway of brake pad and pistons.
[202] 800x600 / tolinek
Jeszkowice Poland
 
Info: ...and cleaned brake assemblies.
[190] 800x600 / tolinek
Jeszkowice Poland
 
Info: Dirty brake assemblies.
[196] 800x600 / tolinek
Jeszkowice Poland
 
Info: Watch out for the springs that keeps the brake pads in the clamp.
It can spring out of the clamp when you loosen the bolt.
[186] 800x600 / tolinek
Jeszkowice Poland
 
Info: Disassebling order.
[297] 800x600 / tolinek
Jeszkowice Poland
 
Info: Dirty brake clamp ;-)
[199] 800x600 / tolinek
Jeszkowice Poland
 
Info: Dismount the rear brake clamp mounting screws.
[223] 800x600 / tolinek
Jeszkowice Poland
 
Info: Cleaned and lubricated brake clamp. Bottom view.
[192] 800x600 / tolinek
Jeszkowice Poland
 
Info: Clamp ready to use. Remember to mount the clamp with glue placed on the mounting screws!
[228] 800x600 / tolinek
Jeszkowice Poland
 
Info: Assembled clamp.
[239] 800x600 / tolinek
Jeszkowice Poland
 
Info: Brake clamp lubricated with cupric grease.
[252] 800x600 / tolinek
Jeszkowice Poland
 
Info: Brake clamp lubricated with cupric grease.
[261] 800x600 / tolinek
Jeszkowice Poland
 
Info: Cleaned brake pistons.
[282] 800x600 / tolinek
Jeszkowice Poland
 
Info: Cleaned brake clamp.
[226] 800x600 / tolinek
Jeszkowice Poland
 
< BACK
692 Photos were returned
Page: [1] [2] [3] [4] [5] <6> [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29]
NEXT >


Links:
Full listing of members with this bike [123]
Listing of members who have photos [75]

Return to the BikePics 2002 Suzuki Bandit 1200 Page
Return to the BikePics Suzuki Bandit 1200 Page
Return to the BikePics Suzuki Page
1997-2014 Bikepics PTY LTD